Wheel Bearing - SVT

Wheel Bearing-SVT





Special Tool(s)

Removal

All vehicles
1. Remove the wheel hub. Wheel Hub

Vehicles with anti-lock brakes





2. Remove and discard the wheel speed sensor ring.

All vehicles
3. Using a suitable screwdriver, remove the water seal carrier (if equipped).





4. Remove the circlip.





5. Using the special tool, remove the wheel bearing.





6. NOTE: A new wheel spindle is supplied with a water seal installed.

Remove and discard the wheel spindle.

Installation

All vehicles





1. Using the special tool, install a new wheel bearing.





2. Install the circlip.





3. Using the special tools, install the water seal carrier.

Vehicles with anti-lock brakes





4. CAUTION: Avoid any impact on the wheel speed sensor ring.

CAUTION: Make sure the wheel speed sensor ring is clean.

CAUTION: Avoid any contact between the wheel speed sensor ring and a magnetic surface.

NOTE: Install a new wheel speed sensor ring.

Using the special tool, install the wheel speed sensor ring.

All vehicles





5. NOTE: Install a new wheel spindle. Install the wheel spindle.

6. Install the wheel hub.