Diesel Data: Automotive Repair
Home >> Ford >> 2004 >> Focus L4-2.0L DOHC VIN 5 >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt Retractor >> Service Precautions >> Vehicle Damage Warnings

Vehicle Damage Warnings

CAUTION:
- Make sure the retractor locating dowel on the underside of the retractor is correctly located.
- Do not attempt to remove the safety belt retractor trim cover.
- Make sure the safety belt retractor locating tang is correctly located.
- The bolt securing the safety belt anchor is held captive by a paper washer. The bolt, spacer and paper washer must remain on the safety belt anchor at all times when the safety belt is detached or removed.
- Make sure the spacer is correctly located between the floor covering and inner sill.
- Make sure that the rear end of the anchor rail, on 3-door vehicles, is correctly located before tightening the bolt
- Make sure the pin on the B-pillar trim is located correctly into the height adjuster.
- Check the operation of the safety belt retractor, the cable routing and latch interlock operation before fully assembling the rear seat backrest.
Diesel-Data.com