Wagon

REAR SAFETY BELT RETRACTOR - WAGON

REMOVAL
1. Raise the rear seat cushion.







2. Detach the rear safety belt lower anchor from the floor panel.
3. Fold down the rear seat backrest.







4. CAUTION: Do not attempt to remove the safety belt retractor trim cover.

Remove the load space upper trim panel.
- Remove the screws.
- Feed the safety belt webbing through the load space upper trim panel.








5. Remove the rear safety belt retractor.

INSTALLATION












1. CAUTION: Make sure the safety belt retractor locating tang is correctly located.

To install, reverse the removal procedure.