Initial Inspection and Diagnostic Overview

INSPECTION AND VERIFICATION

1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical and electrical damage.

VISUAL INSPECTION CHART

Mechanical
- Loose webbing
- Damaged or frayed webbing
- Safety belt retractor and tongue assembly
- Retractor
- Pyrotechnic pretensioner buckle

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures