Front Bumper Cover / Fascia: Service and Repair

FRONT BUMPER COVER

Removal and Installation







1. Remove the pin-type retainer and the radiator air deflector.







2. If equipped, disconnect the turn signal lamp electrical connectors.







3. Remove the radiator grille screws and the radiator grille.
4. Raise and support the vehicle.







5. Remove the radiator lower air deflector.
1 Remove the 8 bolts.
2 Remove the 5 pin-type retainers.
3 Position the air deflector aside.







6. Remove the LH and RH fender splash shield bolts.







7. Remove the LH and RH bumper cover bolts from the fender.







8. Disconnect the side turn signal lamp electrical connectors.
- If equipped, disconnect the fog lamp electrical connectors.

9. Lower the vehicle.







10. Remove the bumper cover from the radiator grille opening panel.
- Remove the pin-type retainers.







11. Remove the bumper cover.
1 Lower the bumper cover.
2 Disconnect the bumper cover from the radiator splash shield.

12. To install, reverse the removal procedure.