Rear Bumper Cover - Wagon

REAR BUMPER COVER - WAGON

Removal and Installation







1. Remove the upper pin-type retainers.







2. Position the loadspace side trim panel inserts aside.







3. Remove the bumper side retaining nut on both sides.
4. Raise and support the vehicle.







5. Remove the 2 pin-type retainers (1 each side) and position the splash shield aside.







6. Remove the 2 nuts (1 each side).







7. Remove the lower pin-type retainers.







8. Remove the 2 side support bracket pin-type retainers.
9. Lower the vehicle.







10. CAUTION: The bumper ends must be pulled away from the fenders to prevent damage to the paintwork.

Remove the rear bumper cover.
- Release the clips.

11. To install, reverse the removal procedure.