Power Steering Fluid Cooler: Service and Repair

Power Steering Fluid Cooler

Special Tools:

Special Tool(s)

Removal





1. Detach the coolant expansion tank.
^ Position to one side.





2. Disconnect the hose from the fluid reservoir.
1 Detach the reservoir.
2 Disconnect the hose.
^ Allow the fluid to drain into a suitable container.





3. Detach the hose from the bracket.
4. Raise and support the vehicle.





5. Remove the radiator splash shield.
^ Remove the six screws.
^ Disconnect the air temperature sensor electrical connector (if equipped).





6. Using the special tool, disconnect the fluid cooler hose.
1 Insert the special tool into the hose quick-release coupling.
2 Move the special tool along the pipe to release the locking tangs.
^ Allow the fluid to drain into a suitable container.





7. Remove the fluid cooler.

Installation





1. NOTE: After installation bleed the power steering system.

To install, reverse the removal procedure.