Steering Wheel: Service and Repair

REMOVAL AND INSTALLATION

Steering Wheel

Removal
1. Remove the driver air bag module.





2. Center the steering wheel.
^ Remove the ignition key and lock the steering in position.





3. Remove the steering wheel.
1 Disconnect the speed control electrical connector (if equipped).
2 Remove the bolt.

Installation

WARNING: When installing the steering wheel make sure the air bag sliding contact is centralized. Failure to follow this instruction may result in personal injury.

CAUTION: After installation, check the correct location of the steering wheel on the steering column shaft by turning the steering wheel in a counterclockwise direction.








1. To Install, reverse the removal procedure.