IB5 Transaxle

Clutch Disc and Pressure Plate





Special Tool(s)

Removal
1. Remove the transaxle.





2. CAUTION: Loosen the clutch pressure plate retaining bolts evenly, by two turns at a time.

Using the special tool, remove the clutch disc and pressure plate.
- Discard the bolts.

Installation





1. Using the special tool, centralize the clutch disc on the clutch pressure plate.





2. CAUTION: Tighten the clutch pressure plate retaining bolts finger tight and then evenly by two turns at a time to the specified torque.

NOTE: Install new clutch pressure plate retaining bolts.

Using the special tool, install the clutch disc and pressure plate.
3. Remove the special tool.
4. Install the transaxle.