Vehicles With Manual Transaxle

FLOOR CONSOLE - VEHICLES WITH MANUAL TRANSAXLE

REMOVAL

All vehicles







1. Remove the floor console front retaining screw on each side.
- Remove the cup holder.







2. Detach the gearshift lever boot from the floor console.

Vehicles with traction control







3. Detach the manual transaxle gearshift lever trim panel from the floor console.
- Detach the retaining clips.







4. Remove the manual transaxle selector lever trim panel.
- Disconnect the traction control electrical connector.

Vehicles with center armrest







5. Detach the rear of the floor console from the floor panel bracket.







6. Remove the armrest trim panel.







7. Remove the armrest.
- Remove the retaining screws.

Vehicles without center armrest







8. Remove the insert from the rear of the floor console.







9. Remove the floor console rear retaining nuts.

All vehicles







10. Fully raise the parking brake lever and detach the boot.







11. Remove the floor console.

INSTALLATION
1. To install, reverse the removal procedure.