Front Toe Adjustment

Front Toe Adjustment

NOTE: The checking and subsequent adjustment of the front toe setting should be carried out on a flat surface and in accordance with the manufacturers instructions for the wheel alignment equipment used.





1. Centralize the steering and lock it in position.





2. Loosen the tie-rod end locknuts.





3. Remove the steering gear boot outer clamps.





4. Rotate the tie-rods an equal amount in either a clockwise or a counterclockwise direction to adjust the toe setting.





5. Tighten the tie-rod end locknuts.





6. Install the steering gear boot outer clamps.
7. Check the toe setting.