RH

Exhaust Manifold RH

Removal and Installation
1. Disconnect the battery negative cable.
2. Remove the air cleaner outlet pipe.





3. Disconnect the differential pressure feedback exhaust gas recirculation (EGR) system electrical and vacuum connections.





4. Disconnect the EGR tube.





5. Remove the EGR tube.
6. Raise and support the vehicle.





7. Remove the LH exhaust manifold flange nuts.





8. Remove the RH exhaust manifold flange nuts.
9. Lower the vehicle.





10. NOTE: Discard the exhaust manifold gasket.

Remove the RH exhaust manifold retaining nuts and the RH exhaust manifold.





11. To install, reverse the removal procedure. Tighten the exhaust manifold nuts in the sequence shown.