Seat Cushion: Service and Repair

FRONT SEAT CUSHION

DISASSEMBLY

All vehicles
1. Remove the seat track.
2. Remove the seat backrest.

Vehicles with power seat







3. Remove the screws in the power seat control switch.







4. Disconnect the electrical connector and remove the power seat control switch.

Vehicles with standard power lumbar







5. Remove the lumbar control switch.







6. Disconnect the power lumbar support air hoses.







7. Disconnect the lumbar seat control switch electrical connector and remove the lumbar control switch.

Vehicles with power bolster and lumbar

NOTE: For vehicles with lumbar and bolster, the pump and solenoid module are serviced as part of the seat cushion frame.







8. Remove the power lumbar and bolster seat switch screws.







9. Disconnect the lumbar and bolster control switches.

All vehicles







10. Remove the J-clips.







11. Remove the hog rings.







12. Remove the front seat cushion cover from the front seat cushion pad.
13. Remove the front seat cushion frame and spring.

Vehicles with power cushion bolster







14. Disconnect the hoses from the two bolster adjuster pads (one shown) and slide the bolster adjuster pad up and off the seat cushion frame.

ASSEMBLY

All vehicles
1. To assemble, reverse the disassembly procedure.