T5OD Manual Transaxle

Gearshift Lever and Boot

Removal and Installation





1. Remove the gearshift lever knob.





2. Remove the console panel gearshift plate. Lift the gearshift lever boot over the gearshift lever.





3. Remove the bolts and the shift lever.





4. Remove the screws and the inner shifter boot.





5. Remove the bolts and the gearshift lever.
6. Remove the gearshift lever boot.

7. CAUTION: Cover the opening in the extension housing to prevent contamination.

Clean the gearshift lever mounting surfaces.
8. To install, reverse the removal procedure.
^ Apply a 3.2 mm (1/8 inch) bead of silicone rubber to the sealing, surface on the gearshift lever.