Crankshaft: Specifications

CRANKSHAFT
Main Bearing Journal Diameter 67.481-67.505 mm (2.6567269-2.6576718 inch)
Connecting Rod Journal Diameter 52.983-53.003 mm (2.085941-2.086728 inch)
Crankshaft Free End Play 0.130-0.301 mm (0.005118-0.011850 inch)
Crankshaft Runout to Rear Face of Block 0.050 mm (0.01969 inch) MAX

Crankshaft Main Bearing Cap Bolts





Stage 1: tighten to 10 Nm (89 inch lbs.).
Stage 2: tighten to 25 Nm (18 ft. lbs.).
Stage 3: tighten to 40 Nm (30 ft. lbs.).
Stage 4: tighten an additional 90 degrees.





Stage 1: tighten to 40 Nm (30 ft. lbs.).
Stage 2: tighten an additional 90 degrees.
Check the crankshaft end play.