Evaporative Check Valve: Service and Repair

FUEL VAPOR CONTROL TUBE ASSEMBLY VALVE

REMOVAL
1. Remove the fuel tank.







2. Remove the retainers.







3. NOTE:
- The fuel vapor vent valve, fuel vapor control valve and the in-line fuel tank pressure sensor are repaired as a fuel vapor control valve tube assembly.
- It may be necessary to lubricate the fuel vapor control valve tube assembly grommets with ESE-M00B144-B Merpol (R) or equivalent to assist in the removal procedure.

Remove the fuel vapor control valve tube assembly.
1 Loosen the fuel vapor vent valve.
2 Loosen the fuel vapor control valve.
3 Remove the fuel vapor control valve tube assembly.

INSTALLATION

1. NOTE:
- Lubricate all O-ring seals with MERPOL (R) O-Ring Seal Lubricant or equivalent meeting Ford specification ESE-M99B144-B.
- New grommets are necessary when the fuel vapor control valve tube assembly is removed.

To install, reverse the removal procedure.
- Leak test the system. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle