Diesel Data: Automotive Repair
Home >> Ford >> 2004 >> Mustang V8-4.6L SOHC VIN X >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Front >> Brake Disc

Brake Disc

Disc

Removal
1. Remove the front disc brake caliper anchor plate.





2. Match mark the hub and the brake disc.





3. If necessary, remove and discard the keeper nuts.

4. NOTE: If the brake disc cannot be easily removed, apply Rust Penetrant and Inhibitor F2AZ-19A501-A or equivalent meeting Ford specification ESR-M99C56-A to the mating surfaces.

Remove the brake disc from the hub.

Installation
1. Clean rust and foreign material from the mating surfaces of the hub and brake disc.
^ Use Metal Brake Parts Cleaner F3AZ-19579-SA or equivalent to clean the brake disc and hub.





2. Apply High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or equivalent meeting Ford specification ESE-M12A4-A to the hub flange.





3. Align the match marks and install the brake disc.
4. Install the anchor plate.
5. Check the Total Indicated Runout (TIR).
Diesel-Data.com