Drive Belt: Service and Repair

Accessory Drive Belt

Removal and Installation

Mach I vehicles
1. Remove the air intake scoop.

Cobra vehicles
2. Remove auxiliary crankshaft pulley.





3. Remove the nut.





4. Remove the fasteners and position the power steering reservoir aside.





5. Remove the A/C muffler bracket and position aside.





6. Remove the belt idler support bracket assembly.

All vehicles
7. Rotate the belt tensioner and remove the accessory drive belt.

8. NOTE: Make sure the accessory drive belt is correctly installed on each pulley.

To install, reverse the removal procedure.
^ Refer to Accessory Drive and Accessory Drive-Supercharged Engine for accessory drive belt routing.