Front

Link-Stabilizer Bar

Removal

CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure correct retention of these parts.

1. Raise the vehicle on a hoist.





2. Disconnect the front stabilizer bar links from the front stabilizer bar.
1 Remove the nuts and bushings. Discard the nuts.
2 Rotate the stabilizer bar to disconnect the links.





3. Remove the stabilizer bar links.
1 Remove the nuts and bushings.
2 Remove the stabilizer bar links.

Installation








1. To install, reverse the removal procedure.