Transmission Installation

INSTALLATION

Material:

Material

1. NOTE: Before installing the transmission, the ball stud, clutch release lever and the input shaft must be cleaned and lubricated. Use Motorcraft Premium Long-Life Grease XG-1-C or XG-1-K or equivalent meeting Ford specification ESA-M1C75 -B.

To install, reverse the removal procedure.
^ Check, and as necessary, fill the transmission with transmission fluid. The total fill capacity is 3.6L (7.5 pt).
2. Apply sealant to the fill plug threads and install the fill plug.
^ Use pipe sealant with Teflon.