B-Pillar Trim Panel - 2-Door

B-PILLAR TRIM PANEL - 2-DOOR

Exploded View

2 Door (Part 1):

2 Door (Part 2):

4 Door (Part 1):

4 Door (Part 2):

Removal and Installation
1. Remove the quarter trim panel.

2. NOTE: Inspect the safety belt D-ring bolt cover for damage. If the safety belt D-ring bolt cover does not remain in place, install a new cover.

Remove the safety belt D-ring bolt cover.

3. Remove the safety belt D-ring bolt.
- To install, tighten to 40 Nm (30 lb-ft).

4. Remove the B-pillar trim panel bolt cover.
5. Remove the B-pillar trim panel bolt.
6. Remove the B-pillar trim panel.
- Pull the B-pillar trim panel toward the center of the vehicle to release the B-pillar trim panel retaining clips.

7. To install, reverse the removal procedure.