Sunroof / Moonroof Motor: Service and Repair

ROOF OPENING PANEL MOTOR

Exploded View

Part 1:

Part 2:

Removal
1. Remove the LH and RH A- and B-pillar trim panels.
2. Remove the roof opening panel headliner retainer (trim ring).
3. Remove the LH and RH sun visors.
4. Position aside the front door weatherstrip as necessary and lower the front portion of the headliner.
5. Disconnect the roof opening panel motor electrical connector.
6. Remove the 3 bolts and the roof opening panel motor.

Installation
1. Install the roof opening panel motor and the 3 bolts.
- Tighten to 3 Nm (27 lb-in).

2. If installing a new roof opening panel motor, connect the electrical connector.
3. Raise the front of the headliner and reposition the front door weatherstrip.
4. Install the LH and RH sun visors.
5. Install the roof opening panel headliner retainer (trim ring).
6. Install the LH and RH A- and B-pillar trim panels.
7. Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. Programming and Relearning