Seat Bolster - Rear

SEAT BOLSTER - REAR







Removal and Installation
1. Remove the rear seat cushion.
- Under the cushion front edge, push the 2 seat cushion latch releases toward the LH side of the vehicle.
- Lift up the front edge of the cushion and remove.

2. Remove the seat bolster nut from the lower stud.
- To install, tighten to 6 Nm (53 lb-in).

3. From the luggage compartment, release the upper retainer behind the seat bolster and remove.
- If installing a new seat bolster, a new retainer must be installed.

4. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.