Test L: DTC B2433 - Drivers Seat Belt Buckle Switch Circuit Short To Battery

PINPOINT TEST L: DTC B2433 - DRIVERS SEAT BELT BUCKLE SWITCH CIRCUIT SHORT TO BATTERY

Normal Operation
The restraints control module (RCM) checks the safety belt buckle switch circuits for faults. If the RCM detects a short to voltage fault, it will store DTC B2433 in memory and send a message to the instrument cluster (IC) module to illuminate the air bag warning indicator.

- DTC B2433 Drivers Seat Belt Buckle Switch Circuit Short to Battery - If the RCM detects a short to battery on the driver safety belt buckle circuit, it will set this DTC.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver safety belt buckle switch
- RCM

L1:

L2-L3:

L4-L5: