Transaxle Support Insulator
Transaxle Support InsulatorSpecial Tool(s)
Special Tool(s):
Transaxle Support Insulator
Transaxle Support Insulator:
Removal
1. Remove the battery. For additional information, refer to Battery.
2. Remove the 3 battery tray nuts. Pull the battery tray up, disconnect the wiring harness fasteners from the battery tray and remove the battery tray.
3. Install the special tools and support the engine.
4. Remove the transaxle support bolt and nuts and remove the transaxle support insulator.
Installation
1. Install the transaxle support insulator bolt and the nuts.
^ Install the 4 insulator nuts.
- Tighten to 48 Nm (35 ft. lbs.).
^ Install the insulator bolt.
- Tighten to 150 Nm (111 ft. lbs.).
2. Remove the special tools.
3. Position the battery tray in place and install the 4 wiring harness retainers on the battery tray.
4. Position the battery tray on the studs and install the 3 battery tray nuts.
^ Tighten to 12 Nm (9 ft. lbs.).
5. Install the battery. For additional information, refer to Battery.