Audio Control Module (ACM)

Audio Control Module (ACM)






Removal and Installation

Note: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval Audio Unit Part Number Retrieval.

Note: If installing a new navigation ACM, remove the navigation DVD, if possible, before sending the ACM to an authorized audio system repair facility.

Note: Module configuration is only required if a new ACM is being installed.

1. Upload the ACM configuration information to the scan tool.
2. Remove the instrument panel center finish panel. Refer to: Body and Frame : Interior Moulding/Trim : Dashboard/Instrument Panel : Service and Repair : Instrument Panel Center Finish Panel
3. Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and the antenna lead-in cable.
4. To install, reverse the removal procedure.
- Download the configuration information to the ACM.