Exhaust Manifold - RH

Exhaust Manifold - RH





Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the 2 catalytic converter-to-exhaust manifold nuts.
^ Discard the nuts.
3. Remove the nuts, the RH exhaust manifold and the gasket.
^ Discard the nuts and gasket.
4. Clean and inspect the RH exhaust manifold.
5. Remove and discard the 6 RH exhaust manifold studs.

Installation
1. Install the 6 new RH exhaust manifold studs.
^ Tighten to 12 Nm (9 lb-ft).
2. Install the new RH exhaust manifold gasket, manifold and 6 new nuts.
^ Tighten to 23 Nm (17 lb-ft).
3. Install the 2 new catalytic converter-to-exhaust manifold nuts.
^ Tighten to 45 Nm (33 lb-ft).