Power Steering Pump Pulley

Power Steering Pump Pulley - 4.0L

Power Steering Pump Pulley - 4.0L:

Removal and Installation
1. Remove the air cleaner outlet pipe.
2. Loosen the 3 power steering pump pulley bolts.
3. Rotate the tensioner and remove the accessory drive belt from the power steering pump pulley.
4. Remove the 3 bolts and the power steering pump pulley.
^ To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.
^ For additional information on accessory drive belt routing, refer to Drive Belts, Mounts, Brackets and Accessories.