Transmission Mount: Service and Repair

Transmission Rear Support Insulator

Transmission Rear Support Insulator Exploded View:

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Using a suitable transmission jack, support the transmission.
3. Loosen the 2 transmission rear support insulator nuts.





4. Remove the 4 transmission mount outer bolts.
^ To install, tighten to 63 Nm (46 lb-ft).
5. Remove the transmission rear insulator center bolt. Carefully pry the exhaust brackets from the exhaust insulators on the rear transmission mount. Remove the transmission mount.
^ To install, tighten to 70 Nm (52 lb-ft).
6. Remove the 2 transmission rear support insulator nuts. Separate the transmission rear support insulator from the transmission mount.
7. To install, reverse the removal procedure.