D-Pillar Trim Panel

D-PILLAR TRIM PANEL

Exploded View

Taurus, Sable (Part 1):

Taurus, Sable (Part 2):

Taurus X (Part 1):

Taurus X (Part 2):

Removal and Installation
1. Remove the third row safety belt anchor-to-floor bolt cover from the rear quarter trim panel.
2. Remove the third row safety belt anchor-to-floor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the D-pillar trim panel.
- Remove the D-pillar trim panel screw cover and screw.
- Pull the D-pillar trim panel toward the inside of the vehicle to release the retaining tabs.

4. To install, reverse the removal procedure.