40 Percent

SEAT CUSHION COVER - SECOND ROW, 40 PERCENT

Exploded View

Taurus X Rear Seat Backrest, Second Row, 40 Percent:

Taurus X Rear Seat Cushion, Second Row, Manual 40 Percent (Part 1):

Taurus X Rear Seat Cushion, Second Row, Manual 40 Percent (Part 2):

Taurus X Rear Seat Cushion, Second Row, Power-Fold 40 Percent (Part 1):

Taurus X Rear Seat Cushion, Second Row, Power-Fold 40 Percent (Part 2):

Taurus X Rear Seat Backrest, Second Row, 60 Percent:

Taurus X Rear Seat Cushion, Second Row, 60 Percent (Part 1):

Taurus X Rear Seat Cushion, Second Row, 60 Percent (Part 2):

Removal and Installation

Power-fold seat
1. Remove the seat.
2. Position the seat forward on the seat track and release the 2 forward trim cover J-clips.







3. Release the hook-and-loop strips from the bottom side of the cushion trim cover.







Manual-fold seat
4. Place the seat in the E-Z entry position.

All seats
5. Release the outer and inner J-clips at the rear of the cushion trim cover.
6. Release the 2 cushion trim cover side retainers and remove from between the cushion frame and seat track.
- Un-curl the retainer ends and push through the opening between the cushion frame and riser/seat track.







7. Manually lock the inboard seat-to-floor latch and raise the backrest.
- For manual-fold seat, lower and lock the seat to the floor.

8. Invert and remove the cushion trim cover from the cushion foam pad.
- Route the bottom trim cover flap through the seat track adjust handle.
- Remove the hog rings.
- Carefully route the cushion trim cover rear flap from between the backrest and cushion.

9. To install, reverse the removal procedure.
- Make sure the child safety seat attaching points are accessible.