Seat Backrest - Rear

Seat Backrest - Rear

Disassembly and Assembly

NOTE: For component identification and locations, refer to Seat - Exploded View, Rear Rear Seats.

1. Remove the rear seat backrest. For additional information, refer to Seat Backrest - Rear Rear Seats.

2. Remove the backrest cover. For additional information, refer to Seat Backrest Cover - Rear Rear Seats.

3. Remove the backrest foam pad.
- Route the release strap through the hole in the foam pad.

4. Release the retainer and detach the release cable from the backrest frame.

5. Remove the 2 nuts and backrest latch.
- To install, tighten to 22 Nm (16 lb-ft).

6. To assemble, reverse the disassembly procedure.