Removal and Replacement

Brake Disc









Removal and Installation

1. Remove the wheel and tire.

2. Remove the brake hose retaining clip and hose from the support bracket.

3. NOTICE: Do not allow the caliper to hang by the brake hose or damage to the hose can occur.

Remove the 2 brake caliper anchor plate bolts.

- Discard the bolts.

- Support the brake caliper and anchor plate assembly using mechanic's wire.

- To install, tighten new bolts to 125 Nm (92 lb-ft).

4. Remove the brake disc.

5. To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.