Diesel Data: Automotive Repair
Home >> Ford >> 2009 >> Fusion AWD V6-3.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Caliper >> Service and Repair >> Removal and Replacement >> Front Disc Brake >> Brake Caliper Anchor Plate

Brake Caliper Anchor Plate




Brake Caliper Anchor Plate









Removal and Installation

1. Remove the brake pads. For additional information, refer to Brake Pads Front Disc Brake.

2. Remove the 2 brake caliper anchor plate bolts.
- To install, tighten to 90 Nm (66 lb-ft).

3. Remove the brake caliper anchor plate.

4. To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.

Diesel-Data.com