Oil Cooler: Service and Repair

Oil Cooler





Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. NOTE: Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.

Remove the engine oil filter and discard.

- To install, tighten to 15 Nm (133 lb-in).





3. Using hose clamp pliers, clamp the 2 oil cooler coolant hoses and remove the 2 coolant hoses from the oil cooler.





4. Remove the oil cooler mounting bolt and the oil cooler.
- Inspect the oil cooler gasket, replace if necessary.

- To install, tighten to 56 Nm (41 lb-ft).





5. To install, reverse the removal procedure.
- Inspect and adjust the coolant level in the degas bottle.