Pinpoint Test H: Clutch System Leakage

Manual Transaxle and Clutch

Pinpoint Tests

PINPOINT TEST H: CLUTCH SYSTEM LEAKAGE

-------------------------------------------------
H1 INSPECT THE CLUTCH MASTER CYLINDER

- Inspect clutch master cylinder for leakage.
- Is the clutch master cylinder OK?

Yes
GO to H2.

No
REPAIR or INSTALL a new clutch master cylinder as necessary. REFER to Clutch Controls Service and Repair.

-------------------------------------------------
H2 INSPECT THE CLUTCH SLAVE CYLINDER

- Inspect clutch slave cylinder for leaks.
- Is the clutch slave cylinder OK?

Yes
GO to H3.

No
REPAIR or INSTALL a new clutch slave cylinder as necessary. REFER to Clutch Controls Removal and Replacement.

-------------------------------------------------
H3 INSPECT THE SYSTEM HYDRAULIC TUBES

- Inspect clutch hydraulic tubes for loose or damaged fittings causing leakage.
- Are the clutch hydraulic tubes OK?

Yes
CARRY OUT a road test to VERIFY customer complaint. Testing and Inspection

No
REPAIR or INSTALL new components as necessary. TEST the clutch system for normal operation.

-------------------------------------------------