Seat Cushion - Rear

Seat Cushion - Rear

Disassembly and Assembly

NOTE: For component identification and locations, refer to Seat - Exploded View, Rear Seat - Exploded View, Rear.

1. Remove the rear seat cushion.
- Locate the cushion latch releases under the cushion front edge.

- Push to release the 2 latches and remove the cushion.

2. Remove all the hog rings from the outer edge of the cushion cover.

3. Invert the cushion cover and remove all the inner rows of hog rings.

4. Remove the cushion cover.

5. To remove the seat cushion latches, use an appropriate tool to release the locking tabs and pry upwards.

6. NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

To assemble, reverse the disassembly procedure.