Seat Backrest Latch - Rear

Seat Backrest Latch - Rear

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Rear Seat Backrest Cover - Rear.

2. Release the retainer and detach the release cable from the backrest frame.
- Route the release strap through the hole in the foam pad.

3. Remove the 2 nuts and backrest latch.
- To install, tighten to 22 Nm (16 lb-ft).

4. To install, reverse the removal procedure.