Oil Pump Screen and Pickup Tube

Oil Pump Screen and Pickup Tube

Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the oil pan. For additional information, refer to Oil Pan Oil Pan.

3. Remove the 2 bolts and the oil pump screen and pickup tube.
- Discard the gasket.

Installation

1. Clean and inspect all mating surfaces.

2. Using a new gasket, install the oil pump screen and pickup tube and the 2 bolts.
- Tighten to 10 Nm (89 lb-in).

3. Install the oil pan. For additional information, refer to Oil Pan Oil Pan.