Dome Lamp: Service and Repair

Interior Lamp

Front









Removal and Installation

Front

1. Remove the interior lamp lens.

2. Release the 4 retaining clips and remove the lamp assembly from the headliner.
- Disconnect the electrical connector.

Rear

3. NOTE: The tabs (located just above the headliner) can be accessed with a small angled pick tool. They are released by pulling them away from the lamp assembly. Be careful not to use too much pressure or the tabs may break.

Release the 3 locking tabs and remove the interior lamp lens.





4. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.





5. To install, reverse the removal procedure.