Crankcase Vent Oil Separator

Crankcase Vent Oil Separator

Removal and Installation

NOTICE: Clean and inspect the crankcase vent oil separator for damage prior to installation. The crankcase vent oil separator gasket cannot be reused and must be replaced prior to installation of the crankcase vent oil separator.

1. Remove the intake manifold.

2. Remove the crankcase vent oil separator hose.

3. Remove the 7 bolts and the crankcase vent oil separator.
- Remove and discard the crankcase vent oil separator gasket.


4. To install, reverse the removal procedure.
1. Install a new crankcase vent oil separator gasket.

2. Tighten the 7 crankcase vent oil separator bolts to 9 Nm (80 lb-in).