Roof Opening Panel Frame - 4-Door Sedan

Roof Opening Panel Frame - 4-Door Sedan

Seat Cushion - Rear

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View

Removal

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system or whenever:
- the roof opening panel motor has been removed from the roof opening panel system
- the roof opening panel glass has been removed from the roof opening panel system
- the roof opening panel assembly has been removed from the vehicle
- a new roof opening panel motor has been installed
- a new sliding glass panel has been installed
- a new roof opening panel assembly has been installed

REFER to Roof Opening Panel Motor Initialization Programming and Relearning.

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the headliner. REFER to Headliner - 4-Door Sedan .

2.

Installation

1. To install, reverse the removal procedure.

- Transfer parts as necessary.

2.

- 6 Nm (53 lb-in)

3. Check for correct alignment of the roof opening panel. REFER to Roof Opening Panel Alignment .

4. Initialize the roof opening panel motor. REFER to Roof Opening Panel Motor Initialization Programming and Relearning.