Sunroof / Moonroof Motor: Service and Repair

Roof Opening Panel Motor

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View










Removal

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system or whenever:
- the roof opening panel motor has been removed from the roof opening panel system
- the roof opening panel glass has been removed from the roof opening panel system
- the roof opening panel assembly has been removed from the vehicle
- a new roof opening panel motor has been installed
- a new sliding glass panel has been installed
- a new roof opening panel assembly has been installed

REFER to Roof Opening Panel Motor Initialization Programming and Relearning.

NOTE: Removal steps in this procedure may contain installation details.

1. NOTE: Make sure that the roof opening panel glass is in the CLOSED position. If necessary, REFER to Roof Opening Panel Manual Operation .
Remove the overhead console. REFER to Console - Overhead .

2.

- 2 Nm (18 lb-in)






Installation

1. NOTE: When installing the roof opening panel motor, it may be necessary to turn the roof opening panel motor slightly to engage the drive splines.
To install, reverse the removal procedure

- Initialize the roof opening panel motor. REFER to Roof Opening Panel Motor Initialization Programming and Relearning.