Brake Disc
Brake Disc
WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.
Exploded View
Removal
1. Remove the wheel and tire. REFER to Wheel and Tire .
2. NOTE: Removal steps in this procedure may contain installation instructions.
3. Detach the brake flexible hose grommet from the bracket, remove the 2 brake caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
- To install tighten to 70 Nm (52 lb-ft).
4. Remove the brake disc.
Installation
1. To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.