Parking Brake Control: Service and Repair

Parking Brake Control

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View

Removal

1. Remove the front floor console. REFER to Console - Front, Floor .

2. Vehicles without parking brake control boot.





3. Vehicles with parking brake control boot.





4. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

5.
- 48 Nm (35 lb-ft)





6.
- 11 Nm (97 lb-in)





7.





8. Vehicles without parking brake control boot.





9. NOTE: Make sure the cable seal is fully seated.
Vehicles without parking brake control boot. Visual check.
- 35 Nm (26 lb-ft)





10. NOTE: Make sure the cable seal is fully seated.
Vehicles with parking brake control boot. Visual check.
- 35 Nm (26 lb-ft)





Installation

1. To install, reverse the removal procedure.

2. Before installing the front floor console, adjust the parking brake cables. REFER to Parking Brake Cable Adjustment - Drum Brakes or REFER to Parking Brake Cable Adjustment - Disc Brakes .