Procedures

Oil Life Reset

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

General Procedure

1. Without starting the engine, place the ignition in the RUN mode.

2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position.

3. After 3 seconds, the message center displays" Service: oil reset in prog.".

4. Continue to hold both the accelerator and brake pedals.

5. The" Service: oil reset in prog." message disappears after 25 seconds and the" Service: Oil reset complete" is displayed.

6. Release both the accelerator and brake pedals.

7. Place the ignition in the OFF mode.

8. The oil life reset procedure is complete.