Canister Purge Control Valve: Service and Repair

Evaporative Emission Canister Purge Valve

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View

Removal

WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: Always disconnect the battery ground cable at the battery when working on an EVAP (Evaporative Emission) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

1. Disconnect the battery ground cable. REFER to General Procedure .

2. Remove the air cleaner outlet pipe. REFER to Air Cleaner Outlet Pipe - 2.0L GDI .

3.

4. Disconnect the 2 EVAP (Evaporative Emission) canister purge valve quick connect couplings. REFER to Quick Connect Coupling - Type 1 .

Installation

1. To install, reverse the removal procedure.

- Carry out the Evaporative Emission System Leak Test. REFER to Evaporative Emission System Leak Test Evaporative Emission System Leak Test.