Halfshaft Seal - LH

Halfshaft Seal - LH

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Special Tool(s)






Material(s)






Removal

1. Remove the LH (Left Hand) front wheel and tire. REFER to Wheel and Tire .

2. Remove the brake hose retainer bolt and the brake hose retainer from the LH (Left Hand) strut.





3. Remove and discard the LH (Left Hand) ball joint bolt and nut.





4. Separate the LH (Left Hand) ball joint from the knuckle.

5. Detach the LH (Left Hand) halfshaft assembly from the transaxle and position aside. Support the LH halfshaft assembly.

6. Remove and discard the circlip.





7. Remove and discard the LH (Left Hand) halfshaft seal.





Installation

1. Install the LH (Left Hand) halfshaft seal onto 307-677 and 205-153 (T80T-4000-W).





2. Using 307-677 and 205-153 (T80T-4000-W) , install the LH (Left Hand) halfshaft seal.





3. Install a new circlip on the LH (Left Hand) halfshaft.

4. Using the LH (Left Hand) halfshaft seal protector provided with the new LH (Left Hand) halfshaft seal, install the LH (Left Hand) halfshaft partially into the transaxle.





5. Remove the LH (Left Hand) halfshaft seal protector and install the LH (Left Hand) halfshaft into the transaxle.





6. Install the LH (Left Hand) ball joint into the knuckle.

7. Install the new LH (Left Hand) ball joint bolt and nut.






- Tighten to 83 Nm (61 lb-ft).

8. Install the brake hose retainer and bolt on the LH (Left Hand) strut.






- Tighten to 11 Nm (97 lb-in).

9. Install the LH (Left Hand) front wheel and tire. REFER to Wheel and Tire .

10. Check the transmission fluid level. REFER to Transmission Fluid Level Check .