Case Temperature Switch

Case Temperature Switch & High-Pressure Relief Valve:

Remove or Disconnect

1. Negative (-) battery cable.
2. Compressor from vehicle.
^ Mount compressor into vise.
3. Lead wire retaining clip.
4. A/C compressor clutch electrical connector.
^ Unscrew and remove case temperature switch from compressor.

Install or Connect

1. Case temperature switch to compressor.

Tighten
^ Case temperature switch to 11 N.m (97 lb.in.).

2. A/C compressor clutch electrical connector
3. Lead wire retaining clip.
^ Remove compressor from vise.
4. Compressor to vehicle.
5. Negative (-) battery cable.

Tighten
^ Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 N.m (11 lb.ft.).