A-Pillar Corner Trim Replacement

A-Pillar Corner Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the corner trim or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Open the front door.

2. Apply protective tape around the body to prevent damage, carefully insert a appropriate trim tool next to the upper clip, and detach the clip by prying on the A-pillar corner trim (A).






3. Pull back the A-pillar corner trim (A) by hand to detach lower clips, then remove the trim.





4. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.